3D Printer Filament PETG Orange

Brand New PETG 3D Printer Filament 1.75 mm Dimensional Accuracy +/- 0.02 mm, 1 KG Spool, Pack of 1

Recommended Extrusion/Nozzle Temperature: 230°C - 250°C
Heated Bed Temp: 70°C - 90°C
Filaments Diameter and Accuracy: 1.75 mm +/- 0.02mm
Filaments Net Weight: 1 kg (2.2 lbs)
Length: 330M

Recommended Printing Conditions:
Cooling Fan: Turned on
Printing Speed: 30~50(mm/s)
Raft Separation Distance: 0.14(mm)
Retraction Distance: 4-6 mm for a Bowden setup/1-2mm for a direct drive printer.
(Note: Printing conditions may vary with different nozzle diameters.)


Bubble-Free
Clog-Free
Tangle-Free
Easy Layer Adhesion
Less Warping
Environmentally Safe
Odorless
Engineered to reduce jamming


Tips for PETG 3D Printing:

PETG filament’s melting point is around 260°C, and it starts transitioning to a more liquid state at about 230°C.
Don’t forget to ensure your FDM extruder and nozzle are able to heat up to temperatures in this range(230°C - 250°C).

Additionally, for best results, it is recommended to use an FDM 3D printer with a heated print bed with a temperature setting somewhere around 70°C-90°C.
This will enable better temperature control when the polymer starts to solidify and minimize the risk of warpage.

For optimal adhesion of the part in PETG 3D printing, it is highly recommended to use a build plate adhesive – a regular old glue stick will work for this.
This will help prevent the print from curling off of the print bed which can be a common occurrence in PETG 3D printing.

PETG is really stick to Glass or PEI, Glue stick or Windex layer is recommended to prevent possible damage to the surface.

Note:This item is not available for pickup.It will be dispatched from our supplier warehouse directly.-All items will be shipped out within 1-2business days after your payment is received.