Pocket Digital Brake Fluid Tester

  • Sale
  • Regular price $20.00
Tax included. Shipping calculated at checkout.


Pocket Digital Brake Fluid Tester

Description

The tester can be used as a digital brake fluid tester suitable for determining brake fluid quality. Developed for professional use in astomotive repair shops and in servicing. Quality is tested and included on five LEDs in terms of "per cent of water in the brake fluid ."

Ready for Brake Fluid Test Unscrew the brake fluid reservoir, and pull off the cap of the Brake fluid tester.Dip the test probes into the brake fluid up to the plastic rim of the device.

To check Fluid Quality Press the button for power on, green LED will light up. Insert the tester into reservoir for one second then the tester result will be correctly indicated by LEDs.Repress the button for power off. The tester will automatically power off after about 15 seconds of inactivity.

Tester Specification:

To check the quality of brake fluid quality

5 LEDs to indicate percentage of water in the brake fluid

Automatically power off

Operated by a LR03 AAA 1.5V battery (Not included)

Tester Instructions:

the green LED lights = water content in the brake fluid H2O <1.5%, brake fluid qualified

the yellow LED lights = brake fluid water content H2O = 1.5% to 3%, can continue to use, test again six months later

the red LED lights = water content in the brake fluid H2O> 3%, can not continue to use the brake fluid needs to be replaced Red LED: change brake fluid

LED red flashing: battery replacement

LED yellow: low moisture content, check again in six months

LED green: brake fluid lines / cell rowr

Attention:

Replace battery if the green LED not light up any longer after you press power on button. Wash the test probe with tab water after use.

In case of skin contact with brake fluid, thoroughly wash the affected skin or clothing with water.

Do not expose brake fluid to the atmosphere for a long time as the fluid is highly hygroscopic

The tester can be used as a digital brake fluid tester suitable for determining brake fluid quality. Developed for professional use in astomotive repair shops and in servicing. Quality is tested and included on five LEDs in terms of “per cent of water in the brake fluid .”