Keyless Remote For Ford

  • Sale
  • $16.00
  • Regular price $49.86
Tax included. Shipping calculated at checkout.


You are looking at a brand-new keyless entry remote. This unit is compatible with following vehicles:

Frequent:315MHZ

1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 Expedition

Before purchase please ensure your old remote looks as the one pictured and has the below part numbers

FCC ID: CWTWB1U331 or CWTWB1U345 CWTWB1U322 GQ43VT11T

Condition: Brand-New. Comes with working battery and electronics inside, and has been tested to be in good working condition.

Buttons: 4 Buttons - Lock, Unlock, Trunk, Panic

Programming: Here are the simple steps:
1. Close all doors, then open your driver side door and press the Unlock button on the drivers door while it is open.

2. Turn ignition from OFF to RUN 8 times within 10 seconds, with the 8th time ending in RUN. The door locks will lock and unlock to confirm that you have entered programming mode(Off is the position where you can remove your key, RUN is the position just shy of starting your car. If the door locks do not cycle you should try it again but faster. If they still do not cycle, your vehicle may not have keyless entry)

3. Within 8 seconds press any button on the first keyless remote to be programmed. Door locks will cycle to confirm programming. If you only have one remote then skip to step 5.

4. Within 8 seconds, press any button on the second keyless remote. Door locks will cycle again to confirm programming. Repeat step 4. for all other remotes.

5. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.
It's that easy!

Condition: Brand-New. Comes with working battery and electronics inside, and has been tested to be in good working condition.

Buttons: 4 Buttons – Lock, Unlock, Trunk, Panic